Industrial Antifoams

RD-15/30/50-Antifoam-Emulsion: Aqueous emulsion of activated polydimethylsiloxane Features: • Excellent dispersion in aqueous media • Good emulsion stability • Good dilution stability • Stable at broad pH range • Excellent loan control persistence • Chemically inert and non-toxic • Cost Effective • Minimizes fabric staining & spotting Applications Effective Antifoam for jet dyeing machines. It is well suited for a wide variety of general textile & carpet dyeing applications where foam is a problem. Other areas of application include waste water treatment agrochemicals, industrial cleaning & Petrochemical processing. Typical Properties Specifications writers: These values are not intended for use in preparing specifications. Please contact your local K. K. Chemicals' Sales Office before writing specifications on this product.

Parameter	Unit	Value
Appearance		Milky white liquid
Total solid content	% w/w	15/35/40-43/50-52
Active material content	% w/w	10/25-28/30-32/41-43
Specific gravity at 25° C	g/ml	0.98 ~ 1.0
pH		5.0 76>
		5.0 – 7.0
Emulsifier type		Non-ionic
Diluent		Water
Defoaming Activity
(50 ppm active)		20/15/15/15 secs. max

How to Use RD Emotion should be diluted with water prior to use Recommended dilution is 1 part RD Emulsion with 5-10 parts cold water. The preferred method of dilution is to add water to the emulsion & not vice versa. Users should evaluate on a lea sample before using in production Suggested starting concentration is 50 - 100 ppm active ingredient

D-20 P is a Powder Silicone Defoamer. Benefits Free-flowing powder Silicone antifoam Application: RD-20 P Powdered Antifoam can be used as a process defoamer/antifoam in biotechnology, water treatment applications. It may be added to dry products, such as instant powder, detergents and fertilizers, to prevent foaming when liquids are added by the consumer at the point of use. How to Use? RD-20P Powdered Antifoam should be added directly to the foaming system. Predilution is net required. A suggested starting level for evaluation is approximately 0.01 weight percent based on the foaming medium. Handling Precautions: Product safety information required for sale use is not included. Before handling, read product and safety data sheets and container labels for safe use, physical and health hazard information. The material safety data sheet is available on the request.

Milky free flowing emulsion used for foam control at the Pulp Mill. An Organo based emulsion in blend with other surface active agents. Defoamer-15H • Easy to handle. • Effective on broad PH range. • Suitable for all pulping process. • Leaves no residue. Properties: • Appearance : White milky emulsion. • pH : 6.0-7.0 • Active Content: 10.0-12.0 % • Solid Content: 15-17% • Sp. Gravity: 0.98-1.0 g/cm2 How to Use? Defoamer-15H is a defoamer formulation for pulpmill application. Average consumption is 450-800 gm/tonne of OD pulp. The product can be applied in its state by dosing pump or automatic dosing can be done by special metering system. It imparts a knockdown at a very low dosage.

Milky free flowing emulsion used for foam control at the Pulp Mill. A Blend of Organo-Polydimethylsiloxane and other surface active agents. Pulp Aid-15-B • Easy to handle. • Effective on broad PH range. • Suitable for all pulping process. • Leaves no residue. Properties: • Appearance : White milky emulsion. • pH : 6.0-7.0 • Active Content: 10.0-12.0 % • Solid Content: 15-17% • Sp. Gravity: 0.98-1.0 g/cm2 How to Use? Pulpaid-15 is a antifoam formulation for pulpmill application. Average consumption is 450-800 gm / tonne of OD pulp. The product can be applied in its state by dosing pump or automatic dosing can be done by special metering system. It is blend of silicone base and imparts a knockdown at a very low dosage.

DEFOAMER-15 S (PULP AID-15 S) : Milky free flowing emulsion used for foam control at the Pulp Mill. A Milky emulsion of Poly dimethyl siloxane and other surface active agents. Pulp Aid-15 S • Easy to handle. • Effective on broad PH range. • Suitable for all pulping process. • Leaves no residue. Properties: • Appearance : White milky emulsion. • pH : 6.0-7.0 • Active Content: 10.0-12.0 % • Solid Content: 15-17% Sp. Gravity: 0.98-1.0 g/cm2 How to Use? Pulpaid-15 is a antifoam formulation for pulpmill application. Average consumption is 450-800 gm/tonne of OD pulp. The product can be applied in its state by dosing pump or automatic dosing can be done by special metering system. It is blend of silicone base and imparts a knockdown at a very low dosage.