RD-15/30/50-Antifoam Emulsion,DEFOAMER-15 H,DEFOAMER-15 B ( PULP AID-15 B ),DEFOAMER-15 S ( PULP AID-15 S ),RD-20 Powder Antifoam

Home

About Us

We Export

Enquiry

View Enquiry Basket

K.K. Speiciality Industrial Antifoams

Grades	Dilutents	Appearance	Base	TSS	Applications
RDHP	Solvent	Opaque	Silicone	100%	Textile / Agro / ETP / Chemical Processing
RDHF	Solvent	Opaque	Silicone	100%	Inks / Paints/ Adhesives
DEFOAMER 30H	Water	Milky	Organic	30%	Paper & Pulp
DEFOAMER 30-B	Water	Milky	Organo Silicone	30%	Paper & Pulp
DEFOAMER 30S	Water	Milky	Silicone	30%	Paper & Pulp
RD-DET	Solvent	Opaque	Silicone	100%	Detergents

* MORE PRODUCTS ARE LISTED BELOW

RD-15/30/50-Antifoam Emulsion

Aqueous emulsion of activated polydimethylsiloxane

Features

Excellent dispersion in aqueous media
Good emulsion stability
Good dilution stability
Stable at broad pH range
Excellent loan control persistence
Chemically inert and non-toxic
Cost Effective
Minimises fabric staining & spotting

Applications

Effective Antifoam for jet dyeing machines. It is well suited for a wide variety of general textile & carpet dyeing applications where foam is a problem. Other areas of application include waste water treatment agrochemicals, industrial cleaning & Petrochemical processing.

Typical Properties

Specifications writers: These values are not intended for use in preparing specifications. Please contact your local K. K. Chemicals' Sales Office before writing specifications on this product.

Parameter	Unit	Value
Appearance		Milky white liquid
Total solid content	% w/w	15/35/40-43/50-52
Active material content	% w/w	10/25-28/30-32/41-43
Specific gravity at 25° C	g/ml	0.98 ~ 1.0
pH		5.0 76>
		5.0 – 7.0
Emulsifier type		Non-ionic
Diluent		Water
Defoaming Activity
(50 ppm active)		20/15/15/15 secs. max

How to Use

RD Emotion should be diluted with water prior to use Recommended dilution is 1 part RD Emulsion with 5-10 parts cold water. The preferred method of dilution is to add water to the emulsion & not vice versa. Users should evaluate on a lea sample before using in production

Suggested starting concentration is 50 - 100 ppm active ingredient

Add to Enquiry Basket

DEFOAMER-15 H

Milky free flowing emulsion used for foam control at the Pulp Mill. An Organo based emulsion in blend with other surface active agents.

Defoamer-15H

Easy to handle.
Effective on broad PH range.
Suitable for all pulping process.
Leaves no residue.

Properties

Appearance : White milky emulsion.
pH : 6.0-7.0
Active Content: 10.0-12.0 %
Solid Content: 15-17%
Sp. Gravity: 0.98-1.0 g/cm2

How to Use

Defoamer-15H is a defoamer formulation for pulpmill application. Average consumption is 450-800 gm/tonne of OD pulp. The product can be applied in its state by dosing pump or automatic dosing can be done by special metering system. It imparts a knockdown at a very low dosage.

Add to Enquiry Basket

DEFOAMER-15 B ( PULP AID-15 B )

Milky free flowing emulsion used for foam control at the Pulp Mill. A Blend of Organo-Polydimethylsiloxane and other surface active agents.

Pulp Aid-15-B

Easy to handle.
Effective on broad PH range.
Suitable for all pulping process.
Leaves no residue.

Properties

Appearance : White milky emulsion.
pH : 6.0-7.0
Active Content: 10.0-12.0 %
Solid Content: 15-17%
Sp. Gravity: 0.98-1.0 g/cm2

How to Use

Pulpaid-15 is a antifoam formulation for pulpmill application. Average consumption is 450-800 gm/tonne of OD pulp. The product can be applied in its state by dosing pump or automatic dosing can be done by special metering system. It is blend of silicone base and imparts a knockdown at a very low dosage.

Add to Enquiry Basket

DEFOAMER-15 S ( PULP AID-15 S )

Milky free flowing emulsion used for foam control at the Pulp Mill. A Milky emulsion of Poly dimethyl siloxane and other surface active agents.

Pulp Aid-15 S

Easy to handle.
Effective on broad PH range.
Suitable for all pulping process.
Leaves no residue.

Properties

Appearance : White milky emulsion.
pH : 6.0-7.0
Active Content: 10.0-12.0 %
Solid Content: 15-17%
Sp. Gravity: 0.98-1.0 g/cm2

How to Use

Pulpaid-15 is a antifoam formulation for pulpmill application. Average consumption is 450-800 gm/tonne of OD pulp. The product can be applied in its state by dosing pump or automatic dosing can be done by special metering system. It is blend of silicone base and imparts a knockdown at a very low dosage.

Add to Enquiry Basket

RD-20 Powder Antifoam

D-20 P is a Powder Silicone Defoamer.
Benefits Free-flowing powder Silicone antifoam

Application

RD-20 P Powdered Antifoam can be used as a process defoamer/antifoam in biotechnology, water treatment applications. It may be added to dry products, such as instant powder, detergents and fertilizers, to prevent foaming when liquids are added by the consumer at the point of use.

How to Use

RD-20P Powdered Antifoam should be added directly to the foaming system. Predilution is net required.

A suggested starting level for evaluation is approximately 0.01 weight percent based on the foaming medium.

Handling Precautions

Product safety information required for sale use is not included. Before handling, read product and safety data sheets and container labels for safe use, physical and health hazard information. The material safety data sheet is available on the request.

Add to Enquiry Basket

We Export

DOW CORNING Silicone Oils & Emulsions DOW CORNING Paper Coatings & PSA CLARIANT Functional Products EVONIC DEGUSSA PRECIPITATED SILICAS FOR ANTIFOAMS LUBRIZOL Speciality Paper Coatings & Adhesives K.K.Speciality Silicone Based Mould Release Agents K.K. Speiciality Industrial Antifoams RD-15/30/50-Antifoam Emulsion DEFOAMER-15 H DEFOAMER-15 B ( PULP AID-15 B )DEFOAMER-15 S ( PULP AID-15 S )RD-20 Powder Antifoam K.K. Speciality Softeners For Fabrics K.K.Speciality Silicones ( Speciality Products )

Visit Our showcase!

View all our products / services as a slide show.

Click Here

We Export

Home | About Us | We Export | Contact Us | Enquiry