Syl-Off SL 160 Coating ( Platinum Solventless ),SYL-OFF SB 7458 Coating ( Platinum Solvented),DOW CORNING Q2-7406 Adhesives ( Silicone Adhesive ),DOW CORNING 288 Mica Binder ( Silicone Adhesive For Mica Tapes )

Home

About Us

We Export

Enquiry

View Enquiry Basket

DOW CORNING Paper Coatings & PSA

PRODUCTS	TYPE	CONTENT	COMPONENT	SUBSTRATE
SL-200 / SL-160	PLATINUM SOLVENTLESS	100%	3	PAPER / POLYCOATED
7680-045	PLATINUM SOLVENTLESS	100%	3	PAPER
SYLOFF 7362 / 7458	PLATINUM SOLVENTED	30%	3	FILMS / PAPER
SL-9104 / 06	PLATINUM SOLVENTLESS	100%	3	POLYESTER
SYLOFF 294	TIN SOLVENTED	40%	3	PAPER / FILM
SYLOFF 7920	EMULSION BASED	40%	2	PAPER
PSA 280A / 7428	SILICONE ADHESIVE	55-57%	2	MASKING & PLATING TAPES
MICA BINDER-288	SILICONE ADHESIVE FOR MICA TAPES	60-62%	2	MICA TAPES

Syl-Off SL 160 Coating ( Platinum Solventless )

Solvent-free silicone release polymer coating

Features

Solvent-free
Fast curing
Provides extremely stable release
Low release force across a variety of peel speeds
Requires catalyst addition

Applications

Release coating for pressure sensitive laminate/labelstock
Single & double-sided industrial release papers
Coatings for liners of technical adhesive tapes
Non-stick foodgrade packaging (see "Food Contact" for specific information)
Non-stick packaging

Typical Properties

Specification Writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales office or your Global Dow Corning Connection before writing specifications on this product.

Test	Unit	Result
Form		Liquid
Chemical nature		Reactive siloxane polymer
Appearance		Clear liquid
Active ingredients	%	100
Density at 25°C (77°F)	g/cm³	0.97
Viscosity at 25°C (77°F)	mPa.s	170

Description

Recommendations about how to use & formulate this product with other Syl-Off® materials can be obtained from the Dow Corning Technical Service group.

How to Use

This Syl-Off® coating is one component of a multi-component silicone release coating system. In order to use this product effectively, it must be blended with the appropriate Syl-Off® release modifiers, catalysts & crosslinkers.

Handling Precautions

Direct contact with eyes & skin may cause slight irritation which can be relieved by flushing with water for 15 minutes. In the case of eye contact, seek medical attention. Rubber gloves and safety glasses should be worn when handling this product. Do not breathe spray or mist.

Add to Enquiry Basket

SYL-OFF SB 7458 Coating ( Platinum Solvented)

Base polymer component for SYL-OFF® brand solvent-based, platinum-catalyzed silicone release coatings

Features

Effective fast cure for paper and film
Provide stable release force
Non-blocking non-migratory release liner
Minimal post-cure

Benefits

Good anchorage property
Flexibility to use with control release additives
Easy to use two-component package

Applications

This product is suitable for use on general as well as specialty release substrates coated from solvent in the following applications:
Release liners for pressure sensitive adhesive laminates/label stock.
Coating for liners of technical adhesive tapes,
In-line, single and double-sided industrial papers and films.
Non-stick packaging

Typical Properties

Specification Writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales office or your Global Dow Corning Connection before writing specifications on this product.

Test	Unit	Result
Type		Reactive siloxane polymer
Physical Form		Solvent dispersion
Color		Clear to slightly hazy
Diluents		Toluene
Active Ingredients	%	30
Specific Gravity at 25°C (77°F)		0.9
Viscosity at 25°C(77°F)	mPa.s	24,000
Flash Point closed cup	°C	5

Description

SYL-OFF® SB 7458 Coating is a base polymer component with a 30 % solids of a reactive siloxane polymer in toluene.

How to Use

The SYL-OFF® SB 7458 Coating is suited for coating substrates with good solvent hold-out. Typical substrates include:

Polyethylene coated kraft
Super calendered kraft
Clay-coated kraft

SYL-OFF SB 7458 Coating ( Platinum Solvented)

Add to Enquiry Basket

DOW CORNING Q2-7406 Adhesives ( Silicone Adhesive )

Pressure sensitive adhesive

Features

Excellent high-temperature properties
Adhesion to 288°C (550°F)
Food-contact capability

Composition

Polydimethylsiloxane gum & resin dispersion; high-viscosity liquid

Applications
General purpose adhesive
Splicing & plating tapes

Typical Properties
Specification Writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales representative prior to writing specifications on this product.

Property	Unit	Value
Appearance		Translucent
Diluent		Xylene
Active Ingredients	%	55 to 58
Viscosity at 25°C (77°F)	cp	20,000 to 80,000
Specific Gravity at 25°C (77°F)		0.98
Flash point, closed cup	°C	27
	°F	81
Electrical properties of the cured adhesive film1
Electrical strength2	V/mil	653
Dielectric constant
at 107Hz		2.93
at 105Hz		2.87
Dissipation factor
at 102Hz		0.004
at 105Hz		0.001
Volume resistivity	ohm.cm	3.5 x at 1014

1.After 96 hours at 23°C (73°F) and 50% relative humidity.
2.Measured with 6.35-mm (1/4-in) electrodes on 2-mil film of adhesive cured on an aluminum panel.

Description

DOW Corning Q2-7406 Adhesive is a dispersion of polydimethyl-siloxane gum & resin. It is diluted with xylene to 55% silicone solids content.

Add to Enquiry Basket

DOW CORNING 288 Mica Binder ( Silicone Adhesive For Mica Tapes )

Features

Good penetration and adhesion to a variety of substrates, such as glass fiber cloth and mica sheet
Suitable for varying manufacturing process, such as coating, dipping

Benefits

Stable and consistent viscosity facilitates the better control of factors in operation
Offering excellent insulation performance

Composition

60% Polydimethylsiloxane polymer and resin dispersed in xylene solvent

Applications

Binder for flame retardant mica tapes

Typical Properties

Specification Writers: These values are not intended for use in preparing specifications. Please contact your local Dow Coming sales office or your Global Dow Corning Connection before writing specifications on this product

Test	Unit	Result
Color		Clear to slight hazy
Diluent		Xylene
Active Ingredient	%	60-62
Specific Gravity at 25° C		0.98
Flash Point, closed cop	*C	27
Viscosity at 25°C	cst	70,000

Description

Dow Corning® 288 Mica Binder is especially designed for flexible flame retardant mica tape applications as a hinging material to firmly bond glass fiber cloth add mica sheets. Dow Corning® 288 Mica Binder is especially formulated to offer good penetration and adhesion to both glass fiber cloth and mica sheds. The strictly controlled viscosity range provides the users ease of operation control and consistency of high performance.

DOW CORNING 288 Mica Binder ( Silicone Adhesive For Mica Tapes )

Add to Enquiry Basket

We Export

DOW CORNING Silicone Oils & Emulsions DOW CORNING Paper Coatings & PSA Syl-Off SL 160 Coating ( Platinum Solventless )SYL-OFF SB 7458 Coating ( Platinum Solvented)DOW CORNING Q2-7406 Adhesives ( Silicone Adhesive )DOW CORNING 288 Mica Binder ( Silicone Adhesive For Mica Tapes ) CLARIANT Functional Products EVONIC DEGUSSA PRECIPITATED SILICAS FOR ANTIFOAMS LUBRIZOL Speciality Paper Coatings & Adhesives K.K.Speciality Silicone Based Mould Release Agents K.K. Speiciality Industrial Antifoams K.K. Speciality Softeners For Fabrics K.K.Speciality Silicones ( Speciality Products )

Visit Our showcase!

View all our products / services as a slide show.

Click Here

We Export

Home | About Us | We Export | Contact Us | Enquiry